Shipping today to NSW, ACT, VIC, TAS, SA, QLD, WA, NT

Victron Energy BatteryProtect 48V-100A

Length: 12.3
Width:  12.0
Height:  6.2
Brand: 
Short Discription: 

BPR048100400 **Please allow 2 weeks for delivery**

AU$230.00

Victron Energy BatteryProtect 48V-100A

More Views

Additional Information

Weight 0.8000
Brand No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

The BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

Programming made easy

The BatteryProtect can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen.

A special setting for Li-ion batteries

In this mode the Battery Protect can be controlled by the VE.Bus BMS.

Ultra-low current consumption

This is important in case of Li-ion batteries, especially after low voltage shutdown.

Over voltage protection

To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 64 V.

Ignition proof

No relays but MOSFET switches, and therefore no sparks.

Delayed alarm output

The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.

Delayed load disconnect and delayed reconnect

The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

DOWNLOAD

__download pdf

DATASHEET


Write Your Own Review

You're reviewing: Victron Energy BatteryProtect 48V-100A

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Value
Quality
Price
Latest Blog

How does an Apricus Solar Hot Water system work?

Before you invest in a solar hot water system it’s good to understand how they work, and how your purchase will be advantageous to your household or business. 

Read more...

New Stiebel Eltron Products

NEW single phase electric instantaneous water heater released 

Read more...

VoltLogic gets grid connection approval

Renewable energy technology developer Renewable Energy Solutions Australia (RESA) has received approval for its VoltLogic power management device to connect to the grid in sections of NSW where power export limitations for larger solar systems have been introduced.

Read more...

Solar Power - towards 2050

Solar Power is stronger than ever. Solar panels in 2014 are producing 4.9% more power than they were three years ago. 

Read more...